21
4.2 Rear Panel
The rear panel of SHDSL.bis router is where all of the connections are made.
Connectors Description of 2-wire/1-port router
DC-IN
Power adaptor inlet: Input voltage 9VDC
LAN
Ethernet 10BaseT for LAN port (RJ-45)
orLAN (1,2,3,4)
10/100BaseT auto-sensing and auto-MDIX for LAN port (RJ-45) (4-port Router)
CONSOLE
RS- 232C (DB9) for system configuration and maintenance
LINE
shdsl.bis interface for WAN port (RJ-11)
RST
Reset button for reboot or load factory default
Connectors Description of 4-wire/4-port router
DC-IN
Power adaptor inlet: Input voltage 9VDC
CONSOLE
RS- 232C (DB9) for system configuration and maintenance
LINE
SHDSL.bis interface for WAN port (RJ-11)
RST
Reset button for reboot or load factory default
!
The reset button can be used only in one of two ways.
(1) Press the Reset Button for one second will cause system reboot.
(2) Pressing the Reset Button for four seconds will cause the product loading the factory
default setting and losing all of yours configuration. When you want to change its
configuration but forget the user name or password, or if the product is having problems
connecting to the Internet and you want to configure it again clearing all configurations,
press the Reset Button for four seconds with a paper clip or sharp pencil.
Summary of Contents for SHDTU03b
Page 1: ...USER MANUAL SHDTU03b G SHDSL bis Bridge Router Modems CTC Union Technologies Co Ltd ...
Page 2: ......
Page 8: ......
Page 95: ......