CTC Union SHDTU03b, User Manual

Page: 77 / 96

77
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit Edit trap host parameter
list Show trap configuration
14.13.4 Supervisor Password and ID
The supervisor password and ID are the last door for security but the most important. Users who
access the router via web browser have to use the ID and password to configure the router and users
who access the router via telnet or console mode have to use the password to configure the router.
Suggest to change the ID and password after the first time of configuration, and save it. At next time
when you access to the router, you have to use the new password.
----------------------------------------------------------------------
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password:
****
Input new Supervisor password: ********
Re-type Supervisor password: ********
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: admin id <pass_conf>
Message: Please input the following information.
Legal user name (Enter for default) <root> :
test
----------------------------------------------------------------------
14.13.5 SNTP
Time synchronization is an essential element for any business that relies on an IT system. The reason
for this is that these systems all have clocks that are the source of time for files or operations they
handle. Without time synchronization, time on these systems varies with each other or with the correct
time and this can cause- virtual server schedule processes to fail and system log exposures with wrong
data.
There are two methods to synchronize time, synchronize with PC or SNTPv4. If you choose
synchronize with PC, the router will synchronize with PC. If you choose SNTPv4, the router will use the
protocol to synchronize with the time server. Synchronization with time server, SNTP v4, needs to
configure service, time_server and time_zone. Synchronization with PC does not need to configure the
above parameters.
Move the cursor “
>> “ to sntp and press enter.
>> method Select time synchronization method
service Tigger SNTP v4.0 service
time_server1 Configure time server 1