CTC Union SHDTU03b, User Manual

Page: 24 / 96

24
The difference Protocol need to setup difference WAN parameters. After knowing the Ptorocol provided
by ISP, you have to ask the necessary WAN parameters to setup it.
Bridge EoA Route EoA
IPoA PPPoA
PPPoE
5.5 Step 5: Install the SHDSL.bis Router
!
To avoid possible damage to this Router, do not turn on the router before Hardware Installation.
9
Connect the power adapter to the port labeled DC-IN on the rear panel of the product.
9
Connect the Ethernet cable.
Note: The 1-port router and 4-port router both supports auto-MDIX switching hub so both straight
through and cross-over Ethernet cable can be used.
9
Connect the phone cable to the product and the other side of phone cable to wall jack.
9
Connect the power adapter to power source.
9
Turn on the PC or NB, which is used for configuration the Router.
VPI:
VCI:
Encapsulation:
IP Address:
Subnet Mask:
Gateway:
DNS Server:
Host Name:(if applicable)
VPI:
VCI:
Encapsulation:
Gateway:
Host Name:(if applicable)
VPI:
VCI:
Encapsulation:
IP Address:
Subnet Mask:
Gateway:
DNS Server:
Host Name:(if applicable)
VPI:
VCI:
Encapsulation:
User Name:
Password:
DNS Server:
Host Name: (if applicable)
IP Address: (if applicable)
VPI:
VCI:
Encapsulation:
User Name:
Password:
DNS Server:
Host Name:(if applicable)
IP Address:(if applicable)