CTC Union SHDTU03b, User Manual

Page: 4 / 96

LEGAL
The information in this publication has been carefully checked and is believed to be entirely
accurate at the time of publication. CTC Union Technologies assumes no responsibility,
however, for possible errors or omissions, or for any consequences resulting from the use of
the information contained herein. CTC Union Technologies reserves the right to make
changes in its products or product specifications with the intent to improve function or design
at any time and without notice and is not required to update this documentation to reflect such
changes.
CTC Union Technologies makes no warranty, representation, or guarantee regarding the
suitability of its products for any particular purpose, nor does CTC Union assume any liability
arising out of the application or use of any product and specifically disclaims any and all
liability, including without limitation any consequential or incidental damages.
CTC Union products are not designed, intended, or authorized for use in systems or
applications intended to support or sustain life, or for any other application in which the
failure of the product could create a situation where personal injury or death may occur.
Should the Buyer purchase or use a CTC Union product for any such unintended or
unauthorized application, the Buyer shall indemnify and hold CTC Union Technologies and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims,
costs, damages, expenses, and reasonable attorney fees arising out of, either directly or
indirectly, any claim of personal injury or death that may be associated with such unintended
or unauthorized use, even if such claim alleges that CTC Union Technologies was negligent
regarding the design or manufacture of said product.
TRADEMARKS
Microsoft is a registered trademark of Microsoft Corp.
HyperTerminal™ is a registered trademark of Hilgraeve Inc.
FCC WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and if
not installed and used in accordance with the instruction manual may cause harmful
interference in which case the user will be required to correct the interference at their own
expense.
NOTICES:
(1) The changes or modifications not expressively approved by the party responsible for
compliance could void the user's authority to operate the equipment.
(2) Shielded interface cables and AC power cord, if any, must be used in order to comply with
the emission limits.
(3) This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
CISPR PUB.22 Class A COMPLIANCE:
This device complies with EMC directive of the European Community and meets or exceeds
the following technical standard. EN 55022 - Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment. This device complies with
CISPR Class A.
CE NOTICE
Marking by the symbol CE indicates compliance of this equipment to the EMC directive of
the European Community. Such marking is indicative that this equipment meets or exceeds
the following technical standards: EN 55022:1994/A1:1995/A2:1997 Class A and
EN61000-3-2:1995, EN61000-3-3:1995 and EN50082-1:1997