CTC Union SHDTU03b, User Manual

Page: 32 / 96

32
7.2.4 PPPoE or PPPoA
PPPoA (point-to-point protocol over ATM) and PPPoE (point-to-point protocol over Ethernet) are
authentication and connection protocols used by many service providers for broadband Internet access.
These are specifications for connecting multiple computer users on an Ethernet local area network to a
remote site through common customer premises equipment, which is the telephone company's term for
a modem and similar devices. PPPoE and PPPoA can be used to office or building. Users share a
common Digital Subscriber Line (DSL), cable modem, or wireless connection to the Internet. PPPoE
and PPPoA combine the Point-to-Point Protocol (PPP), commonly used in dialup connections, with the
Ethernet protocol or ATM protocol, which supports multiple users in a local area network. The PPP
protocol information is encapsulated within an Ethernet frame or ATM frame.
PC
IP: 192.168.0.2
Netmask: 255.255.255.0
Gateway: 192.168.0.254
VPI:0, VCI:32
Encapsulation: LLC
DSLAM
ISP
Bridge BAS
IP: 192.168.0.1
Netmask: 255.255.255.0
Gateway: 192.168.0.254
IP: 192.168.0.254
Before configure the router, check with your ISP about
this information.
Enter Parameters in
BASIC – STEP2.
WAN1 parameters:
VPI : 0
VCI : 33
AAL5 Encap : LLC
Protocol : PPPoA + NAT or PPPoE + NAT
Click Next to setup User name and
password.
For more understanding about NAT, review
NAT/DMZ at page 44.
Type the ISP1 parameters.
Username : test
Password : test
Password Confirm : test
Your ISP will provide the user name and
password.
Idle Time : 10
You want your Internet connection to
remain on at all time, enter 0 in the Idle
Time field.
VPI:
VCI:
Encapsulation:
User Name:
Password:
DNS Server:
Host Name: (if applicable)
IP address:(if applicable)