manualshive.com logo in svg

CTC Union SHDTU03b, User Manual

Share
Download
CTC Union SHDTU03b User Manual Download Page 3

 

CTC Union Technologies Co., Ltd. 

Far Eastern Vienna Technology Center (Neihu Technology Park) 

8F, No. 60, Zhouzi St. 

Neihu, Taipei, 114 

Taiwan 

Phone: +886-2-2659-1021 

FAX: +886-2-2799-1355 

 

 

SHDTU03b 

G.SHDSL.bis Bridge/Router Modem Series 

 

 

User Manual 

Version 1.0 Nov 2007 Release 

 

This manual supports the following models: 

SHDTU03bF-ET10R Single LAN Port, 2 Wire, G.SHDSL Modem with Firewall 

SHDTU03bF-ET10RS Four Switch Port, 2 Wire, G.SHDSL Modem with Firewall 

SHDTU03bAF-ET10RS Four Switch Port, 4 Wire, G.SHDSL.bis Modem with Firewall 

 

 

This document is the first official release manual. Please check CTC Union's website for any 

updated manual or contact us by E-mail at [email protected]. Please address any comments for 

improving this manual or to point out omissions or errors to [email protected]. Thank 

you. 

 

CTC Union maintains a support web site (support.ctcu.com) where you may obtain the latest 

manual, quick installation guide, and updated firmware. Membership to this web site is free, 

however, you must be a registered member in order to access any software updates. 

 

 

Summary of Contents for SHDTU03b

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands