EZT-570S User Manual
91
The
Port
field is used to enter the network port that is to be used by the server to access the FTP
site. The default port is 21. The port number can be set from 0 to 65535.
The
User
field
allows you to enter a user name for FTP site access. When the EZT-570S connects to
the FTP site to transfer files, the user name will be used to identify the connection. If a security login
is required, the proper user name will have to be entered in this field. If security is not used, this field
can be left blank.
The
PSWRD
(password) field is used in conjunction with the user name field and is for entering a
password, if required by your FTP site, so that the EZT-570S can access the site. If security is not
used, this field can be left blank.
The
Server
field is used to enter the server directory where the files are to be backed up. When the
automatic back-up occurs, the EZT-570S will place the historical data files in this directory on the FTP
site. The EZt-570S will automatically create an ‘Alarms’ directory and an ‘Audit’ directory within the
specified server directory for backup of the alarm files and audit trail files.
When the
Automatic Transfer (2:00AM)
option is turned on, the EZT-570S will perform an automatic
backup of all historical data files, alarm files and audit trail files contained in its internal memory to the
designated FTP site. If data logging is currently active, the active file will not be copied.
I
f the barcode reader option is enabled and set for “Start the automatic program”, the
automatic transfer will be skipped if it occurs while a program has been selected through the
barcode reader but has not yet been started by the user. See section 5.9 Barcode Reader
for more information.
When the
Delete internal files when done
option is turned on, the EZT-570S will delete all data log
files, alarm files and audit trail files within its memory after completing the backup to the FTP site.
Note that if data logging is currently active, the active file will not be deleted.
Once all settings have been made, press the “Save” button to save the settings so that on the next
power-up, the entries will be maintained. The “Start” button can be used at any time to perform a
manual data backup. If the files already exist on the FTP site, they will be overwritten on each
subsequent backup. If the FTP site is down, or the EZT-570S is not connected to the network, a local
alarm message on the Alarm screen will indicate a transmission failure.
Typically FTP Server software uses case sensitive alpha-numeric characters for the User
name, Password and Server directory. Contact your network administrator for proper
settings.
Summary of Contents for EZT-570S
Page 150: ......
