EZT-570S User Manual
26
2.6 System
Status
Monitor
The Monitor screen provides status information and alerts to indicate specific operational conditions
or limits that have been reached in the chamber’s operation.
Figure 2-10 System Status Monitor
The LED next to the system status description will be green to indicate that the status is active. Alerts
that require operator attention, such as the low water reservoir or a service notification, will be
indicated by an intermittent beeping of the chamber’s audible alarm. The alarm icon will also flash.
Pressing the alarm icon while one of the alerts is active will automatically display the Monitor screen
for user convenience. The alert can then be silenced through the use of the “Reset” button. See
Section 10, Diagnostics, for alarm codes and corrective actions.
If an alarm is currently active or there is an alarm that had previously occurred and was reset
but not cleared from the alarm screen, pressing the alarm icon will always navigate to the
alarm screen. System alarms take priority over the status alerts. The EZT-570S will always
direct the user to the alarm screen if an alarm is present in the list.
Summary of Contents for EZT-570S
Page 150: ......
