EZT-570S User Manual
102
8.6 Hardware
The “Hardware” menu provides access to EZT-570S’s optional analog and digital inputs and outputs.
The available selections under this menu are dependent upon the options present on the chamber.
8.6.1 Analog
Inputs
The EZT-570S can have up to five analog inputs which are used for remote set point inputs. This
menu item will appear if your chamber is equipped with the remote set point option. With this option,
electrical connections are provided on the chamber for external connection to each available input.
Figure 8-9 Analog Inputs
Use the left or right navigation arrows at the top right of the screen to select the desired analog input
to configure an input. To make changes to the analog input’s configuration, select the desired input
type by pressing the “Vdc” or “mA” button to select either a 0-10V or a 4-20mA input signal. The
selections are mutually exclusive, so selecting one input type will deselect the other.
Select the desired loop that the input is to provide the set point for by pressing the destination button.
A list will be provided with the available loop selections. Select the desired loop by pressing the
on/off button for the loop. The selection is mutually exclusive, so selecting one will turn off the others.
Figure 8-10 Analog Input Loop Select
Summary of Contents for EZT-570S
Page 150: ......
