EZT-570S User Manual
69
5.10 Email
The EZT-570S email server has the ability to send alarm messages to email and SMS addresses.
Up to 30 addresses can be programmed into the system. Each one can be configured to receive
emails, SMS text messages or both. When an alarm occurs, the EZT-570S will send an alert to the
specified address for each user in the list. The email settings are accessed by selecting “Email” from
the setup “Email” menu.
5.10.1 Address
Entry
Select the “New” tab to add new email addresses to the system. For each entry, enter the recipient’s
Name, Email Address and/or SMS Number (up to 50 characters each). Turn on the Email Alarm
and/or SMS Alarm options to specify which addresses the alarm messages are to be sent to. Press
the “Create” button to add the user to the list.
Figure 5-11 Create Email Address
The SMS address is specific to the service provider. Each service provider has their own
unique address; however, the phone number is always the “name” for the address entry.
Below are common examples for some of the more common cell phone providers. There are
internet sites with this information that cover most of the providers, or when in doubt, contact
your service provider for the proper address format.
Cell Phone Provider
Maximum message length
SMS Address to use (where 0123456789 is an
example for a 10 digit cell phone number)
AT&T 160
characters
Nextel (now part of Sprint Nextel)
140 characters
Sprint
Sprint PCS (now Sprint Nextel)
160 characters
T-Mobile 140
characters
Verizon 160
characters
Verizon PCS
Summary of Contents for EZT-570S
Page 150: ......
