EZT-570S User Manual
49
4.4.2
Adjusting Step Time
During program operation, the length of time remaining in a step can be adjusted to increase or
decrease the time left. The adjust step time function allows you to add or subtract time from the
current step; however, the program must first be put into hold. Once in hold, the “Adjust Time” button
on the program Status screen is enabled.
Figure 4-14 Adjust Step Time
When selected, the numeric keypad will be shown. Enter the time adjustment in hours and minutes
and press ‘Enter’ when finished. The time remaining in the step will be adjusted by the total time
entered. Once complete, resume the program.
When adjusting the time of a ramping step, the ramp rate will be altered for the remainder of
the step. The ramp rate will decrease if time is added and increase if time is removed. To
subtract time from a step, enter a negative value for hours and minutes.
Summary of Contents for EZT-570S
Page 150: ......
