CSO sirius+ Instructions For Use Manual Download Page 50

Page: 50 / 60

INSTRUCTIONS FOR USE

| IFU327EN00 - 01/2021

This document is the property of
CSO Costruzione Strumenti Oftalmici srl.
Any reproduction, even partial, it is prohibited.

48/56

ORDINARY MAINTENANCE

5.1

SAFETY WARNINGS

DANGER

Electric shock danger. Unplug the power cable from the mains

socket before disinfecting the device and before any maintenance

operation.

CAUTION

The device does not contain any piece that requires the user's

intervention. Do not dismantle any part of the device.

it is forbidden to carry out any maintenance operation on the device

that is not recalled in instructions for use.

In case of operational faults or malfunctions or for every operation

not mentioned in the instructions for use, there is the obligation to

address an authorized technical assistance centre of the device

Manufacturer.

5.2

CLEANING AND DISINFECTION

CAUTION

Carefully follow the instructions about cleaning and disinfection

described in this manual, in order to avoid any damages to the

device and the accessories.

CAUTION

A correct cleaning and disinfection procedure, together with

appropriate operating procedures, are essential to prevent the

spread of infections or cross-contaminations.

Summary of Contents for sirius+





























































Search results

Summary of Contents for sirius+

Reviews:

CSO sirius+, Instructions For Use Manual, Page: 50 / 60

Search results

Summary of Contents for sirius+

Reviews: