CSO sirius+ Instructions For Use Manual Download Page 40 | Manualshive

Page: 40 / 60

CSO sirius+ Instructions For Use Manual Download Page 40

INSTRUCTIONS FOR USE

| IFU327EN00 - 01/2021

This document is the property of
CSO Costruzione Strumenti Oftalmici srl.
Any reproduction, even partial, it is prohibited.

38/56

4.3

HOW TO PLACE ELECTRIC CABLES

CAUTION

Danger of device falling down. Do not leave free cables which can

represent an obstacle or a danger for the patient or the operator.

CAUTION

Danger of stumbling and falling. Do not let the power cord or the

connection cables free in a place where people could walk.

CAUTION

Electric shock risk. Do not leave the power supply cables in contact

with sharp corners or objects. Collect and attach always the power

supply cables.

It is forbidden to use any extension cable not authorized by the

manufacturer.

For the proper placement of electrical cables and connection to the

elevation column, read instructions for use of ophthalmic tables or of

ophthalmic units. The instruction manual can also be downloaded

from the website

www.csoitalia.it

.

The power socket is on the lower part of the column of the

ophthalmic table and it has to be used for the connection to the

mains power. One of the power sockets on the upper part of the

elevation column is dedicated to the device power supply unit.

«
...
38
39
40
41
42
...
»

Summary of Contents for sirius+





























































Reviews:

No comments