INSTRUCTIONS FOR USE
| IFU327EN00 - 01/2021
This document is the property of
CSO Costruzione Strumenti Oftalmici srl.
Any reproduction, even partial, it is prohibited.
36/56
10
If the eye level indicator does not reach the required height,
adjust the chin rest.
11
Loosen the 4 locking grub screws placed on the chin rest
support.
12
Slide the chin rest rods until reaching the required height of
380 mm. Tighten the previously loosened locking grub screws.
The chin rest rods shall be adjusted upwards no more than 18 mm.
Fig 20 – Loosening the chin rest grub screws Fig 21 – Maximum height for rods adjustment
13
Carry out the electrical connection between the several
components.