CRS Sam4s SPS-300 Series, Operator'S And Programming Manual

Page: 91 / 291

SAM4s SPS-300 Operator's & Programming Manual v1.4 Operations • 91
5. Enter a descriptor using the descriptor method set up on your register (keyboard
overlay or descriptor code. See “Descriptor Programming Methods” on page
137.) After the descriptor entry, press
CASH . The cursor will advance to the
TAX (1) field.
6. Press the YES/NO key to toggle the tax status from N(o) to Y(es). Set the status
for the four possible tax rates and press CASH . The PLU entry is completed.
Not Found PLU Report
Managers will typically use the “Not Found PLU Report” as a tool to update the PLU file. A
list of up to 50 not found PLU items can be retained in the report. When capacity is reached,
you must clear (Z) the Not Found PLU report.

To run an X Report of not found PLUs, choose NOT FOUND PLU (selection #8)
from the Manager Mode menu

To run an Z Report of not found PLUs, choose RESET NOT FOUND PLU
(selection #7) from the R Mode menu.