224 • Program Mode Programming
SAM4s SPS-300 Operator's & Programming Manual v1.4
3.
Using the same procedure, continue programming each line as necessary. Press
CLEAR
at any time to exit. After programming the third line, the fourth, fifth,
and sixth lines display:
PREAMBLE
LINE 4 :
LINE 5 :
LINE 6 :
4.
When the last line has been entered, press
CASH
to accept the line and return to
the
LOGO DESC. PROGRAM
screen.
Postamble
The postamble is a programming message of up to six lines of 32 characters that appears at
the bottom of each receipt and/or guest check.
1.
From the
LOGO DESC. PROGRAM
screen, press
0
to display the
POSTAMBLE
screen:
POSTAMBLE
LINE 1 :
LINE 2 :
LINE 3 :
2.
Using the alpha numeric keyboard overlay (SPS-320/SPS-340, type the
descriptor. For the SPS-345 use the descriptor code method (see page 117.)
Each line can be up to 32 characters. If you make a mistake, press the
BACKSPACE
key (on the alpha overlay or enter the backspace code 97 if you
are using the descriptor code method) to erase the previous character. After you
have completed typing the first line, press
CASH
to accept the new line and
advance to the second line, or press
CLEAR
to return to the
LOGO DESC.
PROGRAM
screen without making any changes.
Summary of Contents for Sam4s SPS-300 Series
