CRS Sam4s SPS-300 Series Operator'S And Programming Manual Download Page 20

Page: 20 / 291

20 • Introduction

SAM4s SPS-300 Operator's & Programming Manual v1.4

Control Lock

The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full
sets of keys.

VOID

Use to void (correct) items outside of a sale.

OFF

The register is inoperable.

REG

Use for normal registrations.

Use to read register reports.

Use to read register reports and reset totals to zero.

Use to program the register.

The S position is a hidden position reserved for

dealer

access.

Before performing any operations in Register Mode a clerk must be signed on. See “Clerk
Sign-On/Sign-Off” for a description of clerk operations.

Control Keys

All SPS-300 series models include two sets of keys that may be used to access the following
control lock positions.

Key Positions

Accessible

REG OFF,

REG

VOID, OFF, REG, X

VOID, OFF, REG, X, Z

VOID, OFF, REG, X, Z, P

C ALL

POSITIONS

Note: Keys may be removed from the control lock in the OFF or REG positions.

VOID

REG

OFF

Summary of Contents for Sam4s SPS-300 Series




































































































































































































































































































Search results

Summary of Contents for Sam4s SPS-300 Series

Reviews:

Related manuals for Sam4s SPS-300 Series

Brands by name

Popular brands

CRS Sam4s SPS-300 Series, Operator'S And Programming Manual

Search results

Summary of Contents for Sam4s SPS-300 Series

Reviews:

Related manuals for Sam4s SPS-300 Series

Brands by name

Popular brands