CRS Sam4s SPS-300 Series, Operator'S And Programming Manual

Page: 117 / 291

SAM4s SPS-300 Operator's & Programming Manual v1.4 S-Mode Programming • 117
2. The total available memory is displayed on the first line of the screen (TTL
AVAIL). The total memory currently allocated is displayed on the second line of
the screen (TTL USED). The TTL USED field is updated when you complete a
change and press
CASH .
Starting at the PLUs field, enter the quantity of each memory field. Press
CASH
after each entry, and the cursor will move to the next field. Page 2 of Memory
Allocation will display after the # OF GROUP TOTALS field is set:
MEMORY ALLOCATION
TTL AVAIL : 1855488
TTL USED : 314865
# EJ LINES 1000

# CHECKS 10
Y=HARD/N=SOFT CHK N
# LINES/SFT CHK 50
3. Continue filling each field until complete. Press CASH after setting the last
field, "# LINES/SOFT CH". The screen will display "ARE YOU SURE ?". N
(No) will display as the default answer to the question. If you wish to implement
the new allocation you have entered, press the
YES/NO key, and then press
CASH .
4. The message "PLEASE WAIT . . . . " displays until the printer prints either:
"MEMORY ALLOCATION OK !" or "MEMORY ALLOCATION SIZE OVER"
if you attempt to allocate features requiring more memory than is available.
5. The SERVICE MODE menu screen displays when memory allocation
programming is completed.