![background image](http://html1.mh-extra.com/html/cricket/cst17/cst17_owners-manual_2685494040.webp)
40
CRICKET STEPPER
OWNER’S MANUAL
m
COMPUTER FUNCTION AND INSTALLATION EXPLANATION
(
Cont
).
•
The computer is wireless and waterproof. It works with sensors that send signals to the device
during the time the user is riding CRICKET STEPPER. It has a bike mode and a cadence mode.
Stores information for 2 separate riders (C1 and C2). Must be programmed with each rider
’s
personal information for individual readings.
BIKE SENSOR AND MAGNET LOCATION
•
The bike sensor works with a magnet that is attached
to the front wheel. IMAGE (A) ITEM 1. When the
wheel rolls, the magnet activates the sensor IMAGE
(A) ITEM 2, and the sensor sends the signal to the
computer. The sensor is attached to the fork with 2
zip ties.
CADENCE SENSORS AND MAGNETS LOCATION
•
The cadence sensor works with a magnet attached to
the crank shaft arm with two zip ties under the left
pedal bar. IMAGE (C) ITEM 1. The sensor IMAGE (C)
ITEM 2 is attached to the crank arm with 2 zip ties.
When the pedals go up and down, the crank shaft arm
rotates forward, with this motion the magnet
activates the sensor, and the sensor sends the signal
to the computer.
NOTE: For future installation the cadence
sensor cannot exceed more than 8mm space from the
magnet. IMAGE (D) ITEM 1.
NOTE: For future installation, the bike sensor
cannot exceed more than 5mm space from the
magnet. IMAGE (B) ITEM 1.
ATTENTION NOTE
:
The numeric value reading
of the computer is not 100
percent accurate.
A
B
C
D
1
2
1
2
1
1