
18
CRICKET STEPPER
OWNER’S MANUAL
m
INFLATING AND ALIGNING THE TIRES WITH THE RIM
(Cont).
STEP 6. When the correct alignment is achieved, proceed to fill out the tire until it reaches 50
PSI total, which is the factory recommended maximum PSI.
STEP 7. After the tires are filled out to 50 PSI, Slowly rotate the wheel while looking for uneven
rotation simultaneously. If the tire rotation is not appropriately aligned with the rim, you must
repeat the process STEP 1 TO 9, STEP 1 starts on (page 17). IT IS VERY IMPORTANT BOTH REAR
TIRES ARE APPROPRIATELY ALIGNED WITH THE RIM TO OBTAIN THE BEST PERFORMANCE OF
CRICKET STEPPER.
STEP 8. If the tire has to be replaced. Make sure the arrow on the tire SEE IMAGE (B) ITEM 2
(page 17) goes with the forward rotation of the wheel.
STEP 9. Re install the cap air valve.
NOTE: Repeat the same process STEPS 1 to 9, STEP 1 starts on (page 17) to inflate the second
rear tire.
TO INFLATE FRONT TIRE.
Follow the same steps 1 to 9 as inflating the rear tires. Except the front tire maximum factory
recommended is 45 PSI.
WARNING
:
•
IF THE OWNER/ USER IS NOT COMPLETELY SURE HOW TO INFLATE AND ALIGN THE
TIRES WITH THE RIM, IT IS VITAL THAT YOU CONSULT A LOCAL BIKE MECHANIC
FOR PROFESSIONAL ASSISTANCE TO ENSURE THE SMOOTH PERFORMANCE OF
CRICKET STEPPER.