38
CRICKET STEPPER
OWNER’S MANUAL
m
OIL CYLINDER INSTALLATION
OIL CYLINDER INSTALLATION FOLLOWING 4 EASY STEPS.
A
B
C
•
STEP 1: Pull the pedal bar ALL THE WAY UP on
the side where you are starting the cylinder
installation. (This will give you extra room to
install the cylinder).
•
STEP 2: Install the bottom side of the cylinder
first. Grab the cylinder with one hand, put it in
position to proceed with installation, (MAKE
SURE THE CYLINDER IS IN THE RIGHT
INSTALLING POSITION), IMAGE (A) ITEM 1. Grab
the cylinder the way you feel most comfortable
with one hand IMAGE (B) ITEM 1, and grab the
quick release pin with the other hand, install the
correct side of the cylinder head inside the main
frame housing, IMAGE (B) ITEM 2, and place the
quick release pin tip in the hole of the main
frame housing, IMAGE (B) ITEM 3, to help you
locate the center hole of the cylinder head, (use
the hole nearest to the center of the bike), Once
you align both holes, insert the quick release pin
all the way through. (The quick release has a
mechanism, that when you insert it all the way
through it automatically locks, it only comes out
if you apply force to pull it out).
•
STEP 3: Grab the upper end of the cylinder with
one hand, the way you feel most comfortable,
put it in position to proceed with installation
IMAGE (C) ITEM 1. Grab the quick release pin
with the other hand, place the cylinder head
inside the pedal bar housing, and place the quick
release pin tip in the hole of the pedal bar
housing, IMAGE (C) ITEM 2, to help you locate
the center hole of the cylinder head, (this pin
can be inserted from either side). Once you align
both holes, insert the quick release pin all the
way through. (The quick release has a
mechanism, that when you insert it all the way
through it automatically locks, it only comes out
if you apply force to pull it out).
•
STEP 4: To install the second cylinder, repeat
the same process following steps from 1 to 3.
1
Right installing position
1
2
1
2
3