12
CRICKET STEPPER
OWNER’S MANUAL
m
STEM ADJUSTMENT.
•
CRICKET STE
PPER’S handle bar
stem can be adjusted according to the height of the user. The
height of the handle bar stem can be adjusted up or down according to the need of the rider
By following the next steps 1-4.
•
STEP 1: Using a 13 mm wrench, loosen the stem bolt located at the top of the stem. SEE IMAGE
REFERENCE BELOW (C) ITEM 1.
•
STEP 2: Loosening the bolt takes about 5 to 6 turns counter clockwise. Gently hit the head of
the bolt with a rigid object. By doing this, the stem locking mechanism gets loose and the stem
will be free to move up or down.
•
STEP 3
:
Move the stem up or down to the position you feel most comfortable. SEE IMAGE
BELOW (D).
WARNING:
DON’T RAISE THE STEM ABOVE THE STOP LINE MARK AT THE LOWER
END OF THE POLE.
•
STEP 4: Make sure the handle bar is aligned with the front wheel. Tighten the stem bolt clock
wise until you get the stem firm in the desired height adjustment
.
IMPORTANT NOTE:
REFER TO PAGES 13 TO 16 FOR FIRST STEPS TO FOLLOW FOR
FACTORY RECOMMENDED ASSEMBLY AFTER CRICKET STEPPER DELIVERY. INCLUDING
HANDLE BAR STEM HEIGHT.
C
D
1
WARNING:
When the user attempts to adjust the height of the handle bar stem, user
must pay attention to the strain of the brake cables. If the height needed for the handle bar
stem, is higher than the length of the brake cables, user must change the brake cable
according to the final adjusted height of the handle bar stem, to avoid malfunctioning of the
brakes.