
33
CRICKET STEPPER
OWNER’S MANUAL
m
UNFOLDING PROCEDURE EXPLANATION.
HOW TO UNFOLD THE CRICKET STEPPER TO RIDING POSITION (STEPS 1 to 4)
CRICKET STEPPER provides an AUTOMATIC SEMI LOCKING SYSTEM. This
system only provides partial locking. It is intended to fold and unfold the
Tricycle and get it in position for easier manual locking and unlocking. By
squeezing the hand release lever, located in the handle bar stem, the force
applied to the lever is transmitted through the cables, and to the spring
pins. The spring pins are located at the bottom of the crossbar of the frame.
By squeezing the hand release lever the spring pins move inward
simultaneously, to disengage the frame from the main frame housing,
allowing the entire front of the Tricycle to collapse. This procedure must be
done after the hand lock mechanism (butterfly head) is disengaged.
A
INFORMATION NOTE:
Step 1
.
Before attempting to unfold CRICKET
STEPPER, make sure the manual lock quick releases are
completely in a forward collapsed position IMAGE (A),
items 1 and 2. The manual lock quick releases are located
at the frame crossbar in the bottom front of the tricycle,
SEE REFERENCE PAGE 5 IMAGE (B) ITEMS 1 AND 2.
Step 2
. Grab the handle bar with one hand, and the
stem with the other hand, IMAGE (B). pull all the way up,
for partial locking of the frame and main frame, until you
hear a click sound. This means the automatic partial
locking is on.
Step 3
. Flip the butterfly head screw all the way up
until it is inside the housing located in the main frame,
SEE REFERENCE PAGE 5 IMAGE (C) ITEM 1. Then turn
the butterfly head screw with your hand clockwise until
it is completely tight. Make sure it is appropriately tight
before begin riding. This process has to be performed on
each side of the tricycle (left and right).
SEE REFERENCE
PAGE 5 IMAGE (B) ITEMS 1 and 2. Tightening of the
butterfly head screws complete the lock mechanism
procedure.
B
2
1