11
CRICKET STEPPER
OWNER’S MANUAL
m
HANDLE BAR ADJUSTMENT
•
CRICKET
STEPPER’S
handle bar can be adjusted according to the height of the
user. The angle of the handle bar can be adjusted forward or rearward according to the need of
the rider. By following the next steps 1 to 3.
•
STEP 1: Use a 6mm Allen key, to loosen the 4 bolts located on the top of the stem. SEE IMAGE
BELOW (A) ITEMS 1, 2, 3, AND 4.
•
STEP 2. Grab the handle grips IMAGE BELOW (B) ITEM 1. Move the handle bar forward or
rearward to the position you feel most comfortable. SEE IMAGE BELOW (B) ITEM 2. FACTORY
SETTING RECOMMENDED (about 42 degrees related to main frame).
•
STEP 3. Tighten the 4 bolts to keep the handle bar at your desired angled position. (When
tightening the bolts
, don’t tie
just one bolt at a time, you have to tighten each one in a random
pattern until you get the handle bar firm in the appropriate angle adjustment).
After the handle bar has been properly adjusted, owner/user
must further test for the correct adjustment. Stand in front
of your Tricycle, clamp the front wheel between your legs,
and Place your hands on the corresponding handle bar grips,
(right and left). Apply force back and forth on the handle bar
to make sure it is appropriately tightened. If there is any
movement from the final adjustment, retighten the bolts. You
need the bolts to be tight enough so that the handle bar
doesn’t move when you ride. However
, you do not want it to
be so tight that you cannot remove the bolts later or the
thread of the bolts becomes stripped.
IMPORTANT NOTE:
A
B
1
2
3
4
1
2