
29
CRICKET STEPPER
OWNER’S MANUAL
m
FRONT WHEEL INSTALLATION INSTRUCTIONS (
Cont
).
WARNING:
•
When you assemble the wheel and the v-brake to the riding position, user must
make sure the wheel is securely locked with the quick release, and the brakes
work properly before attempting to ride CRICKET STEPPER. If owner/user is
not completely sure the wheel, the quick release, or the V-brake, are properly
installed, it is vital to consult a local bike mechanic for professional assistance.
•
IMPROPER INSTALLATION OR ADJUSTMENT OF ANY COMPONENTS CAN
CAUSE SERIOUS INJURY TO THE RIDER OR WORSE.
F
G
1
2
3
STEP 6. Re-engage the front V-brake to the
original position. Squeeze the linear-pull arms
simultaneously, IMAGE (F) ITEMS 1 AND 2, until
the rubber blocks touch the rim,
then insert the
exposed metal part of the cable called the noodle
IMAGE (F) ITEM 3, into the noodle linkage
IMAGE (G) ITEM 1, located on top of the linear
pull arm. The noodle should seat nicely into the
noodle linkage. Slide the flexible rubber casing
IMAGE (G) ITEM 2, over the cable.
STEP 7. Further test the correct installation
of the wheel, by spinning your wheel; make
sure your brake pads are not rubbing the
rim. If your wheel does not spin, it could be
that one side of the axle is not completely
sitting in the fork’s dropout, the wheel is
not centered and it touches the brake pads.
If this is the case you might need to repeat
the process steps 1 to 6 starting on page 26.
1
2