
15
CRICKET STEPPER
OWNER’S MANUAL
m
FACTORY RECOMMENDED ASSEMBLY AFTER DELIVERY(
Cont
).
STEP 5. Stand the tricycle on the ground vertically
SEE IMAGE (G). Install the front wheel and engage
the V brake. SEE IMAGE (H). REFER TO PAGES 26
to 29 for wheel installation and engaging V-brake
instructions.
STEP 6. After installing the front wheel and
engaging the V brake. Place the tricycle on
the ground in the horizontal position.
Looking at the tricycle from the back side,
turn the handle bar 180 degrees to the right
(riding position) Proceed to unfold the
tricycle to riding position. SEE IMAGE (I).
REFER TO PAGES 33-34 FOR UNFOLDING
INSTRUCTIONS.
I
IMPORTANT NOTE: If your Cricket Stepper came with desinflated tires, it is very
important you know how to inflate and align the rear tires with the rim.
If the back wheels
are not aligned properly they will lose the center of the rotation.
Because the tricycle has
two wheels on the rear, the frame will follow the uneven rotation of the wheels; this
uneven movement is transferred from the frame to the handlebar when riding. This
uneven rotation will feel like you are riding on a bumpy surface. If you get a flat tire, and
you are not sure how to align the tires with the rims, It is very important you take the
cricket to a local bike mechanic to inflate the tires properly and align with the rim.
Otherwise you will experience an uncomfortable ride. REFER TO PAGES 17-18 FOR
INSTRUCTIONS ON INFLATING AND ALIGNING THE TIRES WITH THE RIM.
G
H