
16
CRICKET STEPPER
OWNER’S MANUAL
m
FACTORY RECOMMENDED
ASSEMBLY AFTER DELIVERY
(
Cont
).
WARNING
:
•
IF THE OWNER/ USER IS NOT COMPLETELY SURE HOW TO RAISE THE STEM
IT IS VITAL THAT YOU CONSULT A LOCAL BIKE MECHANIC FOR PROFESSIONAL
ASSISTANCE. Improper adjustments can result in serious injuries or worse.
After the stem has been properly adjusted, owner/user
must further test the correct adjustment. Stand in front of
your Tricycle; clamp the front wheel between your legs, to
lock the entire steering system. Place your hands on the
corresponding side of the handle bar (right and left). Apply
force by pulling and pushing the left and the right sides of
the handlebar to make sure it is appropriately tightened.
If there is any movement from the final adjustment,
retighten the stem bolt. It needs to be tight enough so the
stem does not lose adjustment when riding. However, you
do not want it to be so tight that you cannot remove the
screw later or the thread of the screw becomes stripped.
IMPORTANT NOTE:
STEP 7. After the tricycle is in the riding
position. Stand in front of your Tricycle;
clamp the front wheel between your legs,
to lock the entire steering system and
hold the handle bar with one hand SEE
IMAGE (J) ITEM 1. Make sure the front
wheel and the handle bar stem are
appropriately aligned. Re tighten the
handle bar stem bolt using a 13mm
wrench turning clockwise SEE IMAGE (J)
ITEM 2. The bolt needs to be tight
enough so the stem does not lose
adjustment when riding. However, you do
not want it to be so tight that you cannot
remove the screw later or the thread of
the screw becomes stripped.
J
1
2