Crestron
QM-RMCRX
QuickMedia™ Receiver/Processor
Slot 3: C2I-RMC-COM2-232 - Port A and Port B
The C2I-RMC-COM2-232 provides two COM ports (A and B) for controlling
serial devices over RS-232.
NOTE:
Does not support RS-422 or RS-485.
NOTE:
COM B cannot be used to control a device when a PC is controlling the
QM-RMCRX through the console on this serial port.
NOTE:
The [RESERVED] field is left blank.
NOTE:
C2N-NPA8 is not supported.
Each COM port has a built-in two-way serial driver.
Detail View of COM Port A (COM Port B is Identical)
Slot 4: C2QENET-1: C2ZQ-Ethernet
The C2ENET-1 built-in network interface card provides one LAN port with an
RJ-45 connector for connecting the QM-RMCRX to the Ethernet network.
NOTE:
C2N-NPA8 is not supported.
The card provides 252 IP IDs for Ethernet devices.
Slot 5: Cresnet: C2Net-Device
The C2Net-Device slot enables the QM-RMCRX to control up to 252 Cresnet
devices. Each Cresnet device is assigned a unique identifier called a Net ID,
which is a hexadecimal value ranging from 03 to FE.
To view the list of supported devices, expand the control system in the bottom
pane of
System Views
and double-click the C2Net-Device slot, the desired Net
ID, or right-click and select
Add Item
from the submenu. Then select the device
you want to add. Alternatively, you can drag the device from the Cresnet
Control Modules folder onto the Net ID. Supported devices include network
control modules, lighting modules and a variety of Crestron wired touchpanels.
Operations Guide – DOC. 6236A
QuickMedia™ Receiver/Processor: QM-RMCRX
•
39
