Crestron
QM-RMCRX
QuickMedia™ Receiver/Processor
Part Number Compatibility
Due to production changes, recently manufactured QM-RMCRX devices are not
compatible with specific QM-WMC devices. Similarly, newer QM-WMC
devices are not compatible with specific QM-RMCRX devices.
To insure compatibility between a QM-RMCRX and QM-WMC, refer to the
following that lists part numbers for the QM-RMCRX along with compatible
part numbers for the QM-WMC. Refer to the following chart.
Compatible Part Numbers for QM-RMCRX and QM-WMC
QM-RMCRX
Part Number:
Works with QM-WMC
Part Number:
6002008 6002013
6002432
6002423
NOTE:
Part numbers can be found on the silver label affixed to each device.
If you have a part that is not compatible with your existing equipment, contact
Crestron's Customer Support Group for replacement information.
Display Device Selection for a QuickMedia System
QuickMedia fully integrates the display device with the system. Consequently,
careful selection of a display device is required to take full advantage of this
capability. A projector should support discrete video switching commands. This
enables the QuickMedia receiver/processor to seamlessly pass along the three
different video types to the display and alert the display to switch inputs.
In addition, the display device should support discrete power on and off
commands. This enables a system “Room On” button function that will energize
the display. If the display device has a toggle on/off power command, there is a
possibility of getting out of sync with the room power. Most RS-232 display
drivers in the Crestron database support discrete commands. Refer to the
Crestron Database in System Builder or the Dealer/Tech Resources | Whose
Products Do We Control? section of the Crestron website
(
for a list of products. You may search by manufacturer or device type. You may
also call the Crestron customer service team or check our online help system for
the latest information.
Operations Guide – DOC. 6236A
QuickMedia™ Receiver/Processor: QM-RMCRX
•
5
