QuickMedia™ Receiver/Processor Crestron
QM-RMCRX
VIDEO
Composite Video
One BNC type connector for composite video output.
NOTE:
Composite video is a type of video signal in which all of the video
information, the red, green, and blue (horizontal and vertical sync) signals are
mixed together.
RGBHV
1
10
15
RGBHV
One DB15HD male connector for RGB video output.
DB15HD Connector Pinout
PIN DESCRIPTION PIN DESCRIPTION
1 Red
Signal
9 N/C
2
Green Signal
10
Sync Ground
3
Blue Signal
11
ID0 (Ground)
4
Reserved
12
ID1 (No Connection)
5 Ground
13 Horizontal
Sync
6
Red Ground
14
Vertical Sync
7
Green Ground
15
No Connection
8
Blue Ground
NOTE:
RGB is a computer signal that uses the standard High Density (HD-
15) 15-pin connector. It is comprised of three analog video signals: red, green,
blue and separate horizontal and vertical syncs. Most computer monitors use
RGB (usually called VGA, SVGA, XVGA, etc.). RGBHV consists of red,
green, blue, horizontal sync and vertical sync.
NOTE:
Some DLP display devices are extremely sensitive to noise. The anti-
aliasing filter included with the QM-RMCRX may be used at the RGBHV
output or on the display device input.
AUDIO
SPCH L R
S G S G S G
Audio Line Level
One 6-pin mini connector. Three unbalanced line level outputs:
Speech (SPCH), Left (L) and Right (R).
INPUT
1 2 3 4 G
INPUT
This connector provides four software programmable digital inputs. Inputs are
Schmidt trigger type (nominal 2.5 V threshold) with 24 V input tolerance. For
detailed information, refer to “Slot 2: C2I-RMC-DI4” on page 38.
Digital inputs are rated 0 – 24 VDC, 20K ohms input impedance.
IR
S G
IR
A 2-position mini-connector is a mini-implementation of a single PRO2 IR
port. The output is labeled S (signal) and G (ground). Infrared output is rated
up to 1.2 MHz. Serial protocol is one-way RS-232. For detailed information,
refer to “Slot 1: C2I-RMC-IR1” on page 38.
10
•
QuickMedia™ Receiver/Processor: QM-RMCRX
Operations Guide - DOC. 6236A
