Crestron
QM-RMCRX
QuickMedia™ Receiver/Processor
If the program you want to convert contains SIMPL+ or User modules, Crestron
recommends that you first compile each module before converting the larger
program. In this way, the compiler can resolve any ambiguous signals in the
modules and minimize errors when the larger program is converted.
NOTE:
Signals on digital I/O port may not transfer to digital input port on QM-
RMCRX.
Converting SIMPL+ Modules for 2-Series
1. Open the SIMPL+ module you want to convert.
2. Choose the 2-Series processor as the target by clicking the toolbar
button, as shown in the following illustration.
SIMPL+ Toolbar
NOTE:
Note that you can select both X and 2-Series as the targets, so that the
module works for both types of control systems. However, you are limited to
SIMPL+ keywords and functions that are supported on both systems. If you do
not choose a target, then the module may or may not work, depending on the
constructs that are used.
3. Save and compile the module by clicking the
Save and Compile
toolbar button; alternatively, click
Save and Compile
on the
Build
menu (or press
F12
).
Converting User Modules
1. Open the User module you want to convert.
2. Click
Project | Edit Program Header
.
3. Click
2-Series
in the
Target Control System Classes
list box.
You can select other types of control systems as well, but then you are limited to
symbols that are supported by all of these platforms. The module may still work
on unselected control systems so long as unsupported symbols are not used.
Selecting a control system means that you are
requiring
the module to work
there.
Operations Guide – DOC. 6236A
QuickMedia™ Receiver/Processor: QM-RMCRX
•
51
