Crestron
QM-RMCRX
QuickMedia™ Receiver/Processor
Detail View of General Audio Control
<
MuteMicMixOut
> Mutes all Mic audio for as long as the input is high. When
the signal goes low, Mic is un-muted.
<
MuteProgOut
> Mutes all program audio for as long as the input is high.
When the signal goes low, the program audio is un-muted.
<
MicMixDelay
> is adjustable from 0 to 40 ms in increments of 0.1 ms.
<
Preset#
> is the number (1 to 192) of the input preset.
<
ProgComp
> is the program compensation setting for the level of each input
source (input level gain in dB).
<
SaveCompPreset
> and <
RecallCompPreset
> are used to save and recall the
input compensation presets.
The QM-RMCRX provides four independent audio inputs (via the CAT5 QM
port): Program Left, Program Right, Mic1 and Mic2. The onboard mixer can
mix any audio input into any of the three independent audio outputs: Program
Left, Program Right and Speech Audio (Mic Mix Out). A power amplifier
output (labeled Speaker) duplicates the left/right program outputs and allows
speakers to be connected directly to the QM-RMCRX.
The internal amplifier can be turned on and off using the <
AmplifierPwr
>
digital input. The <
AmplifierPwr
> input is level sensitive; thus when the input
is driven high the amplifier is turned on. The <
AmplifierPwr-F
> feedback
signal indicates the current status of the amplifier output.
Operations Guide – DOC. 6236A
QuickMedia™ Receiver/Processor: QM-RMCRX
•
45
