Crestron
QM-RMCRX
QuickMedia™ Receiver/Processor
card slot then select the slot number from the
Slot
drop-down list. For Ethernet,
select the IP ID.
NOTE:
The IP ID and associated IP address of the Ethernet device must be
listed in the IP Table.
Specify the port (Port A or Port B) that the device is connected to, if applicable.
Next, specify the serial protocol that the device expects. The parameters include
the baud rate, parity, the number of data bits and stop bits, the protocol (RS-
232), and the settings for software or hardware handshaking. This information is
provided by the manufacturer’s documentation.
“Passthrough Mode” Window
The PC is now communicating directly with the device.
To exit passthrough mode, simply click
Functions | Exit Passthrough Mode
. A
system reboot also exits the passthrough mode.
Further Inquiries
If after reviewing this Operations Guide, you cannot locate specific information
or have questions, please take advantage of the Crestron award winning
customer service team by calling:
•
In the US and Canada, call the Crestron corporate headquarters at
1-888-CRESTRON [1-888-273-7876].
•
In Europe, call Crestron International at +32-15-50-99-50.
•
In Asia, call Crestron Asia at +852-2341-2016.
•
In Latin America, call Crestron Latin America at
+5255-5093-2160.
•
In Australia and New Zealand, call Crestron Pacific at
+613-9480-2999.
Operations Guide – DOC. 6236A
QuickMedia™ Receiver/Processor: QM-RMCRX
•
35
