QuickMedia™ Receiver/Processor Crestron
QM-RMCRX-BA
Audio Mixer Signals (continued)
SIGNAL TYPE
AND NAME
DESCRIPTION
Analog input
<
Mic2ToPgmRight
>
Sets the MIC 2 mixing level on the AUDIO R channel.
MIC 2 is mixed with MIC 1, LEFT IN and RIGHT IN, and routed to the AUDIO R
output channel.
Valid analog values range from -800d (-80dB) to 0d (0dB), adjustable in
increments of 0.1dB (1d = 0.1dB).
A value of -800d (-80dB) signifies the minimum mixing level and will cut the mixing
level to a complete mute.
A mixing level of 0d (0dB) means that the signal will pass unaffected.
Out of range values will clip the mixing level to the minimum or maximum value.
Analog output
<
Mic2ToPgmRight_F
>
Indicates the current mixing level being applied to MIC 2 on the AUDIO R
channel.
Analog input
<
LeftInToPgmRight
>
Sets the LEFT IN mixing level on the AUDIO R channel.
LEFT IN is mixed with RIGHT IN, MIC 1 and MIC 2, and routed to the AUDIO R
output channel.
Valid analog values range from -800d (-80dB) to 0d (0dB), adjustable in
increments of 0.1dB (1d = 0.1dB).
A value of -800d (-80dB) signifies the minimum mixing level and will cut the mixing
level to a complete mute.
A mixing level of 0d (0dB) means that the signal will pass unaffected.
Out of range values will clip the mixing level to the minimum or maximum value.
Analog output
<
LeftInToPgmRight_F
>
Indicates the current mixing level being applied to LEFT IN on the AUDIO R
channel.
Analog input
<
RightInToPgmRight
>
Sets the RIGHT IN mixing level on the AUDIO R channel.
RIGHT IN is mixed with LEFT IN, MIC 1 and MIC 2, and routed to the AUDIO R
output channel.
Valid analog values range from -800d (-80dB) to 0d (0dB), adjustable in
increments of 0.1dB (1d = 0.1dB).
A value of -800d (-80dB) signifies the minimum mixing level and will cut the mixing
level to a complete mute.
A mixing level of 0d (0dB) means that the signal will pass unaffected.
Out of range values will clip the mixing level to the minimum or maximum value.
Analog output
<
RightInToPgmRight_F
>
Indicates the current mixing level being applied to RIGHT IN on the AUDIO R
channel.
Analog inputs
<
Mic1EQTrim1
>
through
<
Mic1EQTrim4
>
These signals have NO effect if automatic audio compensation is enabled.
Sets the four MIC 1 EQ trims (at 160Hz, 500Hz, 1.2kHz, and 3kHz).
Valid analog values range from -120d (-12dB) to +120d (+12dB), adjustable in
increments of 0.1dB (1d = 0.1dB).
A trim of 0d (0dB) means that the signal will pass unaffected.
Out of range values will clip the trim to the minimum or maximum value.
Analog outputs
<
Mic1EQTrim1_F
>
through
<
Mic1EQTrim4_F
>
Indicates the trim being applied to each band of the MIC 1 equalizer.
Continued on the following page
54
•
QuickMedia™ Receiver/Processor: QM-RMCRX-BA
Operations Guide - DOC. 6332
