QuickMedia™ Receiver/Processor Crestron
QM-RMCRX-BA
RJ-45 QuickMedia Connector Pin Assignments
RJ-45 PIN
NUMBER
WIRE COLORS
(EIA 568B)
QM ASSIGNMENT
RGB AND AUDIO
QM ASSIGNMENT
COMPOSITE,
S-VIDEO AND AUDIO
1
WHITE/ORANGE
- RGB RED
- CHROMINANCE
2
ORANGE
+ RGB RED
+ CHROMINANCE
3
WHITE/GREEN
- RGB GREEN
- LUMINANCE
4
BLUE
+ AUDIO
+ AUDIO
5
WHITE/BLUE
- AUDIO
- AUDIO
6
GREEN
+ RGB GREEN
+ LUMINANCE
7
WHITE/BROWN
- RGB BLUE
- COMPOSITE
8
BROWN
+ RGB BLUE
+ COMPOSITE
Display Device Selection for a QuickMedia
System
QuickMedia fully integrates the display device with the system. Consequently,
careful selection of a display device is required to take full advantage of this
capability. A projector should support discrete video switching commands. This
enables the QuickMedia receiver/processor to seamlessly pass along the three
different video types to the display and alert the display to switch inputs.
In addition, the display device should support discrete power on and off
commands. This enables a system “Room On” button function that will energize
the display. If the display device has a toggle on/off power command, there is a
possibility of getting out of sync with the room power. Most RS-232 display
drivers in the Crestron database support discrete commands. Refer to the
Crestron Database in System Builder or the Dealer/Tech Resources | Whose
Products Do We Control? Section of the Crestron website
for a list of products.
You may search by manufacturer or device type. You may also call the Crestron
customer service team or check our online help system for the latest
information.
6
•
QuickMedia™ Receiver/Processor: QM-RMCRX-BA
Operations Guide - DOC. 6332
