QuickMedia™ Receiver/Processor Crestron
QM-RMCRX-BA
The QM-RMCRX-BA processes standard video (i.e., DVD, VCR, camera
video), RGB video and audio signals through its proprietary QuickMedia
transport port.
The QuickMedia connection port is a revolutionary signal processing system
that allows for transmitting and receiving any signal type (including video,
audio, computer and microphone signals) via CAT5E type cable. A QuickMedia
Wall Plate (QM-WMC), QuickMedia FlipTop box, or QuickMedia Transmitter
(QM-TX) converts these signals from analog to digital and transmits them to a
QM-RMCRX-BA receiver using a CAT5E cable. The QuickMedia receiver
performs frequency compensation on each twisted pair video input to maintain
correct operation.
The QM-RMCRX-BA then converts each of those signal types back to standard
analog signals for connection to a display (projector or flat-panel monitor), an
audio amplifier, or if using the on-board amplifier, directly to speakers.
QM-RMCRX-BA outputs include:
•
RGBHV
•
Composite video
•
S-video
•
Two balanced/unbalanced line audio outputs or an balanced/unbalanced
stereo (left & right) line output
•
One balanced/unbalanced line-level speech output
•
One 20-watt stereo output (10 W per channel), with built-in volume,
bass and treble controls
The QM-RMCRX-BA QuickMedia Receiver/Processor features onboard
professional digital audio processing, with volume and tone control, 12-band
graphic/parametric equalization, and up to 40 ms of delay for speech audio.
The onboard mic mixer can mix the two remote microphones with stereo
program signals in any proportion, so the sound is always precisely tailored to
the listening environment.
All the audio features of the QM-RMCRX-BA are easily configurable using
Crestron SystemBuilder™ software. Using the sliders, you can adjust EQ filters
and presets, input/output gain, and mixing levels. Select real time mode to hear
the sound as it is adjusted and then create a configuration file ready to be
uploaded to the QM-RMCRX-BA.
Video signals received by the QM-RMCRX-BA are applied to the display
device via the RGBHV, S-video, and composite video ports. Each video output
port is switched for signal selection to match the selected input source of the
QuickMedia transmitter (sold separately). The display device can also be
addressed via the COM port to activate only the input of interest. Audio path
routing is accomplished via mixer schemes. Refer to the following block
diagram.
2
•
QuickMedia™ Receiver/Processor: QM-RMCRX-BA
Operations Guide - DOC. 6332
