background image

QuickMedia™ Receiver/Processor                      Crestron 

QM-RMCRX-BA 

 

If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will 

within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with 
Your valid licenses from Crestron of its authorized agent. 

Without prejudice to any other rights, Crestron may terminate this Agreement immediately upon notice if you fail to 

comply with the terms and conditions of this Agreement. In such event, you must destroy all copies of the Software and all of its 
component parts. 

PROPRIETARY RIGHTS 

Copyright. All title and copyrights in and to the Software (including, without limitation, any images, photographs, 

animations, video, audio, music, text, and “applets” incorporated into the Software), the accompanying media and printed 
materials, and any copies of the Software are owned by Crestron or its suppliers. The Software is protected by copyright laws 
and international treaty provisions. Therefore, you must treat the Software like any other copyrighted material, subject to the 
provisions of this Agreement. 

Submissions. Should you decide to transmit to the Crestron website by any means or by any media any materials or 

other information (including, without limitation, ideas, concepts or techniques for new or improved services and products), 
whether as information, feedback, data, questions, comments, suggestions or the like, you agree such submissions are 
unrestricted and shall be deemed non-confidential and you automatically grant Crestron and its assigns a non-exclusive, royalty-
tree, worldwide, perpetual, irrevocable license, with the right to sublicense, to use, copy, transmit, distribute, create derivative 
works of, display and perform the same. 

Trademarks. CRESTRON and the Swirl Logo are registered trademarks of Crestron Electronics, Inc. You shall not 

remove or conceal any trademark or proprietary notice of Crestron from the Software including any back-up copy. 

GOVERNING LAW 

This Agreement shall be governed by the laws of the State of New Jersey, without regard to conflicts of laws 

principles. Any disputes between the parties to the Agreement shall be brought in the state courts in Bergen County, New Jersey 
or the federal courts located in the District of New Jersey. The United Nations Convention on Contracts for the International 
Sale of Goods, shall not apply to this Agreement. 

CRESTRON LIMITED WARRANTY 

CRESTRON warrants that:  (a) the Software will perform substantially in accordance with the published 

specifications for a period of ninety (90) days from the date of receipt, and (b) that any hardware accompanying the Software 
will be subject to its own limited warranty as stated in its accompanying written material. Crestron shall, at its option, repair or 
replace or refund the license fee for any Software found defective by Crestron if notified by you within the warranty period. The 
foregoing remedy shall be your exclusive remedy for any claim or loss arising from the Software. 

CRESTRON shall not be liable to honor warranty terms if the product has been used in any application other than that 

for which it was intended, or if it as been subjected to misuse, accidental damage, modification, or improper installation 
procedures. Furthermore, this warranty does not cover any product that has had the serial number or license code altered, 
defaced, improperly obtained, or removed. 

Notwithstanding any agreement to maintain or correct errors or defects Crestron, shall have no obligation to service or 

correct any error or defect that is not reproducible by Crestron or is deemed in Crestron’s reasonable discretion to have resulted 
from (1) accident; unusual stress; neglect; misuse; failure of electric power, operation of the Software with other media not 
meeting or not maintained in accordance with the manufacturer’s specifications; or causes other than ordinary use; (2) improper 
installation by anyone other than Crestron or its authorized agents of the Software that deviates from any operating procedures 
established by Crestron in the material and files provided to You by Crestron or its authorized agent; (3) use of the Software on 
unauthorized hardware; or (4) modification of, alteration of, or additions to the Software undertaken by persons other than 
Crestron or Crestron’s authorized agents. 

ANY LIABILITY OF CRESTRON FOR A DEFECTIVE COPY OF THE SOFTWARE WILL BE LIMITED 

EXCLUSIVELY TO REPAIR OR REPLACEMENT OF YOUR COPY OF THE SOFTWARE WITH ANOTHER COPY OR 
REFUND OF THE INITIAL LICENSE FEE CRESTRON RECEIVED FROM YOU FOR THE DEFECTIVE COPY OF THE 
PRODUCT. THIS WARRANTY SHALL BE THE SOLE AND EXCLUSIVE REMEDY TO YOU. IN NO EVENT SHALL 
CRESTRON BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND 
(PROPERTY OR ECONOMIC DAMAGES INCLUSIVE), EVEN IF A CRESTRON REPRESENTATIVE HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY THIRD PARTY. CRESTRON 
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AS TO TITLE OR INFRINGEMENT OF THIRD-PARTY RIGHTS, 
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY OTHER WARRANTIES, NOR 
AUTHORIZES ANY OTHER PARTY TO OFFER ANY WARRANTIES, INCLUDING WARRANTIES OF 
MERCHANTABILITY FOR THIS PRODUCT. THIS WARRANTY STATEMENT SUPERSEDES ALL PREVIOUS 
WARRANTIES. 

70 

 QuickMedia™ Receiver/Processor: QM-RMCRX-BA  

Operations Guide - DOC. 6332 

Summary of Contents for QM-RMCRX-BA













































































Reviews: