Crestron
QM-RMCRX-BA
QuickMedia™ Receiver/Processor
RELAY OUTPUT
Two 2-pin isolated relay connectors are provided for controlling low voltage
contact closure devices such as drapes, screens and lifts. Each connector is
rated 2 A @ 50 V.
Indicators
The QM-RMCRX-BA front panel indicators are described as follows.
QM LINK
This LED indicates an established QuickMedia link.
COM A
This red LED indicates COM A port activity.
COM B
This red LED indicates COM B port activity. Constant blinking indicates that
the port is used for remote console connection.
IR
This red LED indicates IR port activity.
INPUT
This red LED indicates input activity.
PWR (Power)
This green LED illuminates when the unit is connected to and receives 24 VDC
power from an external power pack or from Cresnet.
ACT (LAN)
This yellow activity LED illuminates when the QM-RMCRX-BA detects
Crestron Ethernet traffic (i.e., XPanel™).
NET (Cresnet)
This yellow LED illuminates when the QM-RMCRX-BA communicates with
Cresnet devices on the network, and also indicates that the SIMPL Windows
program currently loaded has a network device defined at the same network ID
as the QM-RMCRX-BA.
Reset Buttons
Two buttons are provided on the front panel of the QM-RMCRX-BA. Refer to
the following descriptions.
HW-R
Pressing this button initiates system hardware reset. (Same effect as
disconnecting and reconnecting power.)
Operations Guide – DOC. 6332
QuickMedia™ Receiver/Processor: QM-RMCRX-BA
•
13
