ILT Shade Controller
Crestron
C2N-SSC-2
28
•
ILT Shade Controller: C2N-SSC-2
Operations & Installation Guide - DOC. 6318
If a USB-to-serial adapter must be used, Crestron has tested the following
devices with good results.
Belkin (large model) F5U103
I/O Gear GUC232A (discontinued)
Keyspan
USA-19QW
(discontinued)
Other models, even from the same manufacturer, may not yield the same
results.
The procedure in this section provides details for RS-232 communication
between the PC and the control system. If TCP/IP communication is
preferred, consult the latest version of the Crestron e-Control Reference
Guide (Doc. 6052) or the respective Operations Guide for the control
system. These documents are available from the Downloads | Product
Manuals section of the Crestron website (www.crestron.com). Refer to
the figure below for a typical connection diagram when uploading files.
Note:
Use a standard DB9 male to female “straight-through” cable.
Typical Connection Diagram when Uploading
