Crestron
C2N-SSC-2
ILT Shade Controller
Operations & Installation Guide - DOC. 6318
ILT Shade Controller: C2N-SSC-2
•
3
(CAIP) only. New users may be required to register to obtain access to
certain areas of the site (including the FTP site).
Physical Description
Refer to the figures below and on the following page. The unit is housed
in a black metal enclosure with labeling and controls on the front surface.
The bottom edges of the cover/faceplate extend to form two flanges with
screw slots for convenient mounting on any flat surface. Interface
connectors are mounted on opposite ends of the unit. The two 4-pin
RJ-11 connectors on the “top” end, labeled 1 and 2, provide connection
to two shade motor controller circuits. A 4-pin male Cresnet network port
on the “bottom” end, labeled 24 Y Z G, provides operating power and
communications to/from the unit.
NOTE:
Power for the shade motor is independent of the Cresnet system.
Physical Views
