ILT Shade Controller
Crestron
C2N-SSC-2
12
•
ILT Shade Controller: C2N-SSC-2
Operations & Installation Guide - DOC. 6318
1. Open the Crestron Viewport.
2. From the Viewport menu, select
Functions | Serial Number
ÅÆ
TSID Conversion Tool
. The “Serial Number
ÅÆ
TSID
Conversion Tool” window is displayed.
“Serial Number to TSID Conversion Tool” Window
3. Enter the serial number or TSID number as instructed; press
the appropriate button to obtain the corresponding number.
NOTE:
Enter serial numbers, including spaces, exactly as they appear on
the unit label. Alpha characters in serial numbers or TSID numbers may
be entered in upper or lower case.
Installation
The following tools/hardware are required for installation of the Shade
Controller:
•
Cresnet network cable (not supplied)
•
Cresnet 4-pin mating connector (supplied)
•
Dual Lock fastener (supplied)
•
Phillips screwdriver (not supplied)
•
Four 1 in. #6 pan head Phillips screws (not supplied)
NOTE:
Verify that you have sufficient Cresnet power to support your
net devices.
