Crestron
C2N-SSC-2
ILT Shade Controller
Operations & Installation Guide - DOC. 6318
ILT Shade Controller: C2N-SSC-2
•
29
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start
SIMPL Windows and from the menu bar, select
Tools |
Viewport.
2. Refer to the figure after this step. From the Viewport menu,
select
Setup | Communications
settings
(alternatively, press
Alt+D
) to open the “Port Settings” window.
Setup | Communications Settings Command
3. Select
RS-232
as the connection type. Verify that an available
COM port (COM 1 is shown after this step) is selected, and
that all communication parameters and necessary options
from the “Port Settings” window are selected as shown after
this step. Click the
OK
button to save the settings and close
the window.
