Crestron
C2N-SSC-2
ILT Shade Controller
Operations & Installation Guide - DOC. 6318
ILT Shade Controller: C2N-SSC-2
•
31
Uploading a SIMPL Windows Program
A control
system
source file
has the
extension
.smw. A
compiled
SIMPL
Windows file
has the
extension
.spz for a 2-
Series
control
system, .bin
for CNX
generation,
and .csz for
CNX
generation
with
SIMPL+.
The SIMPL Windows file can be uploaded to the control system using
SIMPL Windows or via the Crestron Viewport.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select
File | Open
to view the “Open” window,
navigate to the SIMPL Window file (.smw),
and click
Open
.
3. Select
Project | Transfer Program
.
Upload via Crestron Viewport
1. Verify that the procedure for “Communication Settings” that
begins on page 27 has been performed.
2. As shown after this step, select
File Transfer | Send
Program
(alternatively, press
Alt+P
) from the Viewport
menu bar.
File Transfer | Send Program Command
3. The “Send Program” window appears, as shown on the next
page. Click
Browse
, locate the compiled file (.spz for PRO2)
and click
Open
. This will display the program's header
information and enable one or both of the
What to Send
check
boxes. If the program does not contain any SIMPL+ modules,
only the
SIMPL Program
check box will be enabled. If it does
contain SIMPL+ modules, then the
SIMPL+ Program(s)
check box will also be enabled. Select one or both check
boxes and then click
Send Program
to begin the transfer.
NOTE:
Refer to the latest version of the Crestron 2-Series Control
Systems Reference Guide (Doc. 6256) or the respective Operations
