![background image](http://html.mh-extra.com/html/cpi/t02ko/t02ko_installation-and-operation-manual_2674996043.webp)
KA BAND OUTDOOR TWT AMPLIFIER
L R
LOWER LINE SHOWS:
ATTEN: NN.N dBm CABINET: NNN C TUBE: NNN C
FAN CTRL: N.N V
U
D
AMP
FAULT CONDITION
LOWER LINE SHOWS:
“HELIX OVER CURRENT FAULT”
“HELIX OVER VOLTAGE FAULT”
“HELIX UNDER VOLTAGE FAULT”
“POWER SUPPLY ARC FAULT”
“DC BUSS FAULT”
“FAN STALLED FAULT”
“HIGH REFLECTED RF FAULT”
“LOW RF FAULT”
“HIGH RF FAULT”
“BBRAM DATA INVALID FAULT”
“SSIPA OVER CURRENT FAULT”
“HELIX VOLTAGE DETECTED DURING STANDBY”
“TUBE OVER TEMPERATURE FAULT”
“CABINET OVER TEMPERATUE FAULT”
“COVER INTERLOCK FAULT”
“TUBE SWITCH OVER TEMP FAULT”
“EXTERNAL INTERLOCK FAULT”
ALARM CONDITION
LOWER LINE SHOWS:
If a fault conditions occurs,
the Main menu will
automatically be displayed.
SYSTEM
DISPLAY
A1: XMIT NN.N dBm MANUAL ON-line
1:1 System
DISPLAY
A1: XMIT NN.N dBm ON-line A2: FLT NN.N dBm OFF-line
1:2 System
A3: XMIT NN.N dBm ON-line MANUAL
A2: XMIT NN.NN dBm MANUAL OFF-line
DISPLAY
A1: XMIT NN.N dBm LOAD MANUAL
1:1 Power Combined System
A2: XMIT NN.N dBm OUT MANUAL
A1: MANUAL ON-line
A2: MANUAL OFF-line
A1: ON-line A2: OFF-line
A3: MANUAL ON-line
A1: XMIT NN.N dBm LOAD MANUAL
A2: XMIT NN.N dBm OUT MANUAL
A2: OUT MANUAL
A1: LOAD MANUAL SW1:2 SW2:1 SW3:2
SYSTEM
SYSTEM
SYSTEM
CONTROL
SET PWR
ENTER
TO SELECT
U
D
ENTER
TO ADJUST TO ACCEPT
CHANGE
CIF CONTROL POINT:
DISPLAY
LOCAL
SERIAL ETHERNET
REPEAT PRESSING CONTROL KEY TO CYCLE
BETWEEN LOCAL/SERIAL/ETHERNET
t
AMP/SYSTEM/CONTROL/SET PWR
FUNCTION KEY TREE
FIGURE B-2
AMP
SYSTEM
LCL
M&C
RESET
MENU
FAULT
Figure 3-6-b. Remote Control Unit Menu Tree
(Refer to Appendix E for the 11x 17 copy)
3.4 Operation with PC Computer and Setup &
Remote Control Software
This software allows the user to set up and remotely control the Ka-Band TWTA via a PC
computer running in Windows with the CPI supplied GUI (Graphical User Interface) remote
software provided with the amplifier,
01033839
. The functions, controls and monitors are the
same as those accessed by the remote control panel.
Refer to Appendix B for a complete description of operation with this software program.
D
OC
.01031492 R
EV
.3
3-11