![background image](http://html.mh-extra.com/html/cpi/t02ko/t02ko_installation-and-operation-manual_2674996029.webp)
KA BAND OUTDOOR TWT AMPLIFIER
Figure 2-2
RS-232 Cables
2.4.5
Switch Interface Connector (J5)
Connector J5 is a round 26-pin female (socket) connector that is used for redundant system
operation.
NOTE: A mating, wired connector (jumper plug) is supplied with the
unit. If the amplifier is to be used in a standalone configuration, this
connector must be used.
2.4.6
RF Coaxial Cable Connections (J4)
Refer back to Figure 2-1 for connector locations. A power monitor cable can be connected directly
to front panel connector J4 (40 dB nominal coupling). Tighten the connector.
CAUTION!
Position the coaxial cables so that there is no stress
on connectorJ4.
D
OC
.01031492 R
EV
.3
2-5