background image

INSTALLATION INSTRUCTIONS

 

Get the Clearest Picture and Sound

Channel Master by PCT

2151 East Broadway Road, Ste 211 | Tempe, AZ 85282-1933 | USA

Tel +1.480.813.0925 | Fax +1.480.545.1080

© 2008 Channel Master by PCT a division of PCT International, Inc

RCCPP and Channel Master are trademarks of PCT International, Inc.

Channel Master trademark is used under license.  Specifications subject to change.

All rights reserved. Pub PCTCM.3410341234143418.INST.20080721

www.channelmasterintl.com

1. Install type F-male connectorized input coaxial cable from the cable   

  operator or from the antenna to the “RF IN” port on the amplifier.
2. Install type F-male connectorized RF coaxial cable from the “RF OUT”  

  port(s) to the television set, set top box, or cable modem.

3. Verify AC voltage rating of power source conforms with AC/DC adapter.
4. Connect F-male connectorized RF coaxial cable between “PWR IN” port on  

  the drop amplifier and power adapter F-type connection.
5. Connect the power adapter to AC voltage source, Installation is complete

MULTIMEDIA DROP AMPLIFIERS

CM-3410 (PCT-MA2-M)

CM-3412 (PCT-MA2-2P)

CM-3414 (PCT-MA2-4P)

CM-3418 (PCT-MA2-8P)

INSTALLATION INSTRUCTIONS

 

Get the Clearest Picture and Sound

Channel Master by PCT

2151 East Broadway Road, Ste 211 | Tempe, AZ 85282-1933 | USA

Tel +1.480.813.0925 | Fax +1.480.545.1080

© 2008 Channel Master by PCT a division of PCT International, Inc

RCCPP and Channel Master are trademarks of PCT International, Inc.

Channel Master trademark is used under license.  Specifications subject to change.

All rights reserved. Pub PCTCM.3410341234143418.INST.20080721

www.channelmasterintl.com

1. Install type F-male connectorized input coaxial cable from the cable   

  operator or from the antenna to the “RF IN” port on the amplifier.
2. Install type F-male connectorized RF coaxial cable from the “RF OUT”  

  port(s) to the television set, set top box, or cable modem.

3. Verify AC voltage rating of power source conforms with AC/DC adapter.
4. Connect F-male connectorized RF coaxial cable between “PWR IN” port on  

  the drop amplifier and power adapter F-type connection.
5. Connect the power adapter to AC voltage source, Installation is complete

MULTIMEDIA DROP AMPLIFIERS

CM-3410 (PCT-MA2-M)

CM-3412 (PCT-MA2-2P)

CM-3414 (PCT-MA2-4P)

CM-3418 (PCT-MA2-8P)

Reviews: