![background image](http://html.mh-extra.com/html/cpi/t02ko/t02ko_installation-and-operation-manual_2674996097.webp)
KA BAND OUTDOOR TWT AMPLIFIER
Each meter can be configured for a different reading by right clicking on the meters and selecting
the desired reading. (See below)
The control buttons are located at the bottom of the window.
TRANSMIT
places the amplifier in
transmit state.
STANDBY
places the amplifier in standby state.
RESET
resets an amplifier latched
in a fault condition.
RF INHIBIT
inhibits the amplifier’s RF output.
Mute MP
mutes the ODU
Remote Media Player, which sounds when a fault occurs.
B.2.3 Settings
Window
From the
Edit
menu select
Settings
. This window consists of four tabs, each containing settings
specific to the individual amplifier.
B.2.3.1 General
The
General
tab contains RF power, fault, and alarm settings as well as RF unit options. These
settings are pre-set at the factory. It is recommended not to dramatically change any of these
values.
ALC (Automatic Level Control) automatically adjust the attenuation of the amplifier to provide a
pre-set power level with a fixed input.
The attenuation adjusts the output power of the amplifier with a fixed input. The typical range is
30dB.
D
OC
.01031492 R
EV
.3
B-5