![background image](http://html.mh-extra.com/html/cpi/t02ko/t02ko_installation-and-operation-manual_2674996059.webp)
KA BAND OUTDOOR TWT AMPLIFIER
4.4.1 IP
Setup
Table 4-2. Default Configuration-Ethernet Interface Option
Parameter Factory
Defaults
Function
IP Address
192.168.000.254
Amplifier IP Address
IP Mask
255.255.255.000
Used to determine the
subnet for the amplifier
IP Gateway
192.168.000.001
Used to direct packets
addressed to non-local
networks
SMTP IP Address
192.168.0.10
Address of mail server
Domain Name
-
Domain Name of sender
NTP Server Address
192.043.244.018
IP address of Network
Time Server
Time Server Enabled
No
Enables the HPA to
request time data from
the Time Server at the
above address.
Username ‘cpi’
Password ‘cpi’
To change the default settings, use a web-browser to connect the amplifier. Make sure that the PC
is configured for the same subnet as the amplifier, e.g. set the IP-address/mask of the PC to
192.168.0.100/255.255.255.0.
In the address field of the web-browser, type in the IP-address of the amplifier, e.g.
. If a login-prompt appears, type in
cpi
for both the login name and the
password.
D
OC
.01031492 R
EV
.3
4-7