KA BAND OUTDOOR TWT AMPLIFIER
6. From
the
Setup
menu select
Configuration
.
Figure B-2 Configuration Screen / Amplifiers 1-5 Tab
7. Select
the
Interface
tab.
Figure B-2a Configuration Screen / Interface Tab
8. Select
the
Baud Rate
,
Parity
,
Word Length
,
Protocol
, and
CR/LF
settings that match the
amplifier’s configuration.
9. If connecting using the PC’s serial communication port, select the appropriate
Port
and select
COM Port
as the
Connection Type
.
If connecting via Ethernet, enter the appropriate IP address in the
IP Address
edit box and
select
Ethernet
as the
Connection Type
. Check the
Enabled
check box.
10. Select the
Amplifiers 1-5
tab (Refer to Figure B-2).
D
OC
.01031492 R
EV
.3
B-3