1 - 04.2014
CORRADI SpA - INSTALLATION MANUAL - pERGOTENDA®FLUX
4 di 53
CONTROLS AND VERSIONS
WALL MOUNTED CONTROLS (CUSTOMER RESPONSIBILITY)
To open the canvas, press the lower zone of the button, to
close the canvas, press the upper part. When the button is
released the canvas will stop its pergotenda®fluxment
immediately.
ELECTRIC COMMAND
In case of
FLUX
with a wall-switch, push the switch in the low
area in order to move the awning downwards, push it in the
up area to move the awning upwards. Once you release the
switch the awning will stop.
The drive must be installed between 90 and 120 cm off the
ground.
RADIO CONTROL
If
FLUX
is equipped with radio control, the canvas lift, lower
and stop movements are explained in the “motor and
automatism” manual.
Awning going
downwards
Awning going upwards
FLUX
It is custom designed and built for the client to protect from
the sun and inclement weather, with the exception of snow;
The structure is fully self-supporting and may be used in winds
of up to class 8 on the Beaufort scale as shown in table 2.
On the anchored canvas version, the canvas must be removed
if the wind exceeds the values indicated in table 2.
MANUAL CONTROL
If the
FLUX
is fitted with manual drive, to open and close the
canvas, insert the winding handle in the seat of the gearbox
and turn clockwise (to raise the canvas) or anti-clockwise (to
lower the canvas).
